Function
This station is used to align transport units automatically. Pallets are brought into the correct position using pneumatically and hydraulically driven alignment arms. Different pallet sizes are possible.

Features

• Installation variations: gravity roller table, roller queuing conveyor, roller chain queuing conveyor
• Alignment by pneumatically or hydraulically driven alignment arms
• Outer or centre runner alignment
• Can also be supplied with goods alignment labels
• Rolling removal for high pallet weights

Function
These components carry out mechanical scanning of runners and free capacity profiles. The contours and height are also checked before storage. If errors are detected, the pallet is rejected by the automatic sequence in order to prevent any defects.

Features

• Mechanical scanning of runner and free capacity profile
• Optical scanning of load unit (length, width, height)
• Automatic identification of pallet sizes and reporting to control system
• Automatic error detection and rejection

Function
This magazine for automatic provision of empty pallets can stack and unstack up to 12 pallets without requiring conveyors. It is suitable for both lengthwise and transverse operation.

Features

• Automatic empty pallet feed and removal
• Lengthwise and transverse stacking
• Unstacking device for pallet separation
• Stacking devices
• each fitted with lifting arms on both sides

Function
This station allows load carriers to be fed to the fully automated conveyor system. Pallets can be set down onto the station using either hand lifting trucks or forklifts.

Features

• Loading and removal using hand fork lifting trucks / forklifts
• Flexible adaptation to height of conveyor systems (can be fitted with hoisting device)
• Impact protection to prevent damage